cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Fix slow broadband speeds

We know how frustrating it is when your broadband is running slower than usual, so we've created this guide to help you fix the problem. When you're ready, work through the steps below.

 

New to TalkTalk or just upgraded to fibre? Your line will go through a stabilisation period which usually lasts for around 10 days. It's normal for your speeds to vary during this time. 

 

Take a look at our service status page to see if there are any issues in your area that might be affecting your services. You can also visit My Connection to quickly test your connection and get SMS updates on any issues.

 

Run a speed test and compare the result to the estimated speed quoted in your welcome pack. If your current speed is similar to your estimated speed, the good news is that your broadband is working as we'd expect it to.

 

Now check that your equipment is set up correctly. 

  • Use the original cables supplied with your router
  • Check that each cable is connected securely at both ends
  • Make sure that your router is connected to your main phone socket
  • Use your splitter or microfilters correctly (if you have any)

 

Turn your router off at the mains, along with your Openreach modem if you have one. If you’ve got Fibre you can switch everything back on after 20 minutes. For non-Fibre it’s 30 seconds. Refreshing your broadband connection is a quick and easy fix for most common connection problems.

 

Your Wi-Fi speed is shared amongst all connected devices, so your connection might struggle if you've got several devices that are all streaming, browsing, or gaming at the same time. Try disconnecting everything in your house that’s connected to the internet, apart from the device you're currently using and any wireless powerline adapters. If your speed improves, congestion on your network was probably slowing you down. You should monitor and limit how many devices you have connected at once, or consider swapping to a package that’s better suited to your needs.

 

All wireless routers broadcast Wi-Fi signals on a channel. If any of these channels get too busy – i.e. if your neighbour’s router is broadcasting on the same channel as yours – it can slow your internet down. Depending on your technical ability, you may want to try changing your wireless channel to remedy this.

 

Temporarily unplug any wireless powerline adapters, such as a Wi-Fi Extender Kit, to see if your speed improves. If it does, your adapters might be set up incorrectly. Try setting them up again.

 

Test your speed using a wired connection instead of Wi-Fi.

  1. Plug the yellow Ethernet cable that came with your router into your device
  2. Plug the other end into any of the yellow Ethernet ports on the back of your router
  3. Run a speed test when your device has connected to the internet

If you get better speeds on a wired connection, wireless interference could be the problem. Try to keep your router free from obstructions and away from other electronic devices. You may also want to try a Wi-Fi Extender Kit to help your signal go further in your home.

 

Plugging your router into your test socket is a good way to find out if there's an issue with your external wiring; however, not all main phone sockets have one:

  • Main phone sockets that have two ports or one port with a horizontal line across the front contain a test socket.
  • Main phone sockets that have one port without a horizontal line don't have a test socket. If this sounds like yours, please skip this step and don't try to unscrew the faceplate.
test socket yn-01.png


Here’s how to connect your router to your test socket:

  1. Carefully unscrew the main phone socket faceplate with a screwdriver. If it doesn't have screws, squeeze the sides of the faceplate to detach it
  2. With the faceplate removed, you'll see the test socket inside. It looks similar to the phone port on the front of your main phone socket but without the sliding cover
  3. Plug a microfilter into the test socket
  4. Plug your router's broadband cable into the microfilter port labelled ADSL
  5. Now run a speed test

If your speed improves whilst you're connected to your test socket, there could be a fault with your internal wiring. Slower or similar speeds could indicate a fault with the wiring outside of your home.