cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

FIbre Support

Get expert support with your Fibre connection.

Connection Dropping Out

cotmire
Team Player
Private Message TalkTalk
Message 37 of 37

Hello,

 

For about a week now my connection has been dropping out, at first it was a few times a day and I only noticed it on the WiFi-connected PC I was working on furthest away from the router - now it's got really bad, it's happening multiple times an hour and affecting everything including our phones and ethernet-connected TV etc, the connection is basically unusable today.

 

The connection uptime shown in the router admin panel is unaffected, nothing in the logs indicates that there was actually an internet disconnection.

 

Today I've tried connecting the router to the test socket but that didn't make any difference. My dial tone sounds fine. For some reason the TalkTalk line test tool just keeps telling me this: "Oops, looks like something went wrong. We're currently struggling to fetch the relevant information due to technical difficulties".

 

It got so bad dropping out every few minutes this afternoon that I found an old HG633 router and tried plugging that in instead of the Sagemcom hub; for a few hours it seemed to help but I think it was a coincidence as it has dropped out exactly the same way again 3 times in the last hour.

0 Likes
36 REPLIES 36

Message 21 of 37

Line test still isn't completing. Could I just ask, are you currently experiencing any problems with your telephone service, any noise on the line line?

Chris

0 Likes

Message 22 of 37

Sorry, not booked it yet, I need to run a line test before I can book the engineer as I need to enter the line test reference number on the engineer booking form, but unfortunately due to a system issue the line test won't complete. I've tried a couple of times and will try again now

 

Chris

0 Likes

cotmire
Team Player
Private Message TalkTalk
Message 23 of 37

Thank you. This actually seems to be affecting neighbouring flats as well - having tried connecting to two WiFi networks at the same time yesterday they both cut out at the same time. Mine cut out and didn't come back on at one point yesterday I had to switch router off for 20 minutes. This morning we have no connection at all. As soon as possible would be good for the engineer booking. Is it booked yet?

0 Likes

Message 24 of 37

OK I'll book the engineer now and get back to you with the details


Chris

0 Likes

cotmire
Team Player
Private Message TalkTalk
Message 25 of 37

Ok I understand about potential charges, please arrange, thank you.

0 Likes

Message 26 of 37

Hi cotmire

 

I will arrange the engineer visit. Can you also confirm potential engineer charges

 

Engineer charges

0 Likes

cotmire
Team Player
Private Message TalkTalk
Message 27 of 37

Hi Debbie,

 

It was at the test socket but I've moved it back now as it makes no difference either way, I've tried both ways with all 3 routers at this point. Maybe the problem is the socket itself.

 

Can I have an afternoon engineer visit? Any day is fine.

0 Likes

Message 28 of 37

Hi cotmire

 

I've completed another line test and this is clear - No faults detected.

 

I can see re connections on the line. Is the new router currently connected at the test socket?

 

The next step will be an Openreach engineer visit.

0 Likes

cotmire
Team Player
Private Message TalkTalk
Message 29 of 37

Yes it is happening with wired devices too.

 

I plugged the HG633 back in as it had seemed a bit better but have actually been getting the same issue - the only difference is with that router my devices keep the WiFi connection but still lose the internet connectivity for a minute (vs a complete disconnect/reconnect with the Sagemcom). Regardless of router or 2.4ghz/5ghz/ethernet/device type the issue is there. The connection uptime stat does not reset though. When I use the Sagemcom routers it always shows a downstream noise margin of 0dB which I gather isn't good (the HG633 shows 6.7 though?).

 

I just tried to run a line test through the TalkTalk support page and it said:

"We need to investigate further.
Our diagnostic tool picked up on a potential issue but to help us understand what’s going on you’ll need to run a more in depth line test."

 

It said it would take 5 minutes and I can only run it once every 5 days, but when I tried to it just said "We've run into a problem. Sorry, we're working hard to resolve this issue. Please try again later."

0 Likes

Message 30 of 37

Hi cotmire

 

I'm really sorry to hear this.

 

The line tests are clear. Are wired devices also losing connection?

0 Likes

cotmire
Team Player
Private Message TalkTalk
Message 31 of 37

Hi Debbie,

 

I had one of the dropouts again this evening so I've plugged in the new router using the new filter and cables directly into the test socket, but unfortunately it's happened 3-4 more times already over the first 3 hour period (but no more in the following 3 hours - it's very random!).

0 Likes

Message 32 of 37

Hi Debbie yes thank you it arrived this afternoon. The connection has been better past 48hrs with the old model, will set this new one up and let you know how it goes.

0 Likes

Message 33 of 37
0 Likes

Message 34 of 37

Hi cotmire

 

No problem 🙂

 

The new router is on its way, please allow 24-48hrs for this to arrive.

 

Please let us know how the connection compares.

 

Thanks

 

Debbie

0 Likes

cotmire
Team Player
Private Message TalkTalk
Message 35 of 37

Hi Debbie,

 

Thank you. Yes please I think new equipment is worth a try since the older router seems to have been an improvement.

Debbie-TalkTalk
Support Team
Staff
Private Message
Message 36 of 37

Hi cotmire

 

I'm sorry to hear this.

 

I've completed a line test and this is clear, no faults detected. The connection also appears to be stable.

 

Would you like me to send a new router, cables and filter so we can rule all equipment out? I know you have tested with an older router but it would be worth testing with a newer one (including cables and filter)

0 Likes